Uploads from gervo1865_2 - LJ Gervasoni, tagged weather, with geodata

Warrnambool breakwater large swell breaks 5993

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sat, 09 Jul 2011 21:50:09 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

Strong winds and high tides in winter has caused the right conditions for the odd massive spray of water at the breakwater, where the Southern Ocean meets Lady Bay. Quite a school holiday attraction today with almost traffic jam conditions along viaduct road.

Breakwater on a very calm day www.flickr.com/photos/gervo1865/5787903293/

Breakwater on a more normal day www.flickr.com/photos/gervo1865/4688863135/

From Victorian Heritage Database vhd.heritage.vic.gov.au/vhd/heritagevic_new#detail_places...
Victorian Heritage Register (VHR) Number
H2124
Level of Significance
Registered
Statement of Significance What is significant?
The Warrnambool Breakwater was designed by the eminent British harbour engineer Sir John Coode in 1879 and constructed between 1884 and 1890. Warrnambool was the centre of a prosperous farming region from the 1840s, and following the construction of jetties in the 1850s the harbour was extensively used and was a regular stop on the coastal steamer route. A plan was approved by the Government in 1874 to provide protection to shipping by constructing a breakwater, at an estimated cost of £110,000, but work stopped in 1877 after only £30,000 of this had been spent. In 1879 the Government commissioned Coode, who had been brought to Victoria by the Melbourne Harbour Trust to advise on works to improve the Port of Melbourne, to present a plan for completing the breakwater at Warrnambool. His original proposal was considered too expensive, and he presented a revised plan for a shorter structure to cost an estimated £134,000, consisting of a timber viaduct leading from the shore out to a 900 feet long concrete breakwater and wharf. In 1884 a tender was accepted for the approach works to the viaduct, to cost £27,173, and in 1885 a contract for £129, 017 was accepted from Arthur Dobson for the remaining works. The work was completed in 1890, but the structure soon proved to be too short to give good protection from weather from the south-east or to allow berthage for larger vessels. Rather than trade through the port increasing after the completion of the breakwater, it fell, largely because of competition from the just-completed railway line. It was also apparent that the breakwater was causing siltation in the harbour, which by 1910 required continuous dredging. In 1914 a contract was let for £70,000 to extend the breakwater by about 300 ft, but this work was a failure and the new structure soon began to subside. By the 1920s about two-thirds of the original harbour was silted up. An attempt was made in the 1920s to reduce siltation by sheeting the viaduct, but this only increased the problem. By the 1940s the harbour was no longer used. During the 1950s and 1960s the viaduct was altered again, with the base enclosed and filled with basalt and the road on top re-levelled.
The Warrnambool Breakwater consists of two parts: the concrete breakwater extending out into the bay, and the timber viaduct which once joined it to the shore, which now runs along the east side of the Merri River and is surrounded by land to the east. The breakwater is 30ft wide with a 15 ft wide parapet with a walkway along the top. It is made up of a base of 32 ton concrete blocks with mass concrete above the waterline. The viaduct was originally a raised timber structure, but is now filled in below and to the sides with bluestone rubble, and there is an asphalt roadway, known as Viaduct Road, laid along the top. The area to the east of the viaduct which was once part of the harbour is now land, and a car park has been constructed along the new shoreline. The breakwater railway was removed in 1962, though some remnants of rail remain, and all buildings once associated with the breakwater have also been removed.
How is it significant? The Warrnambool Breakwater is of historical significance to the state of Victoria.
Why is it significant? The Warrnambool Breakwater is of historical significance as one of the most important maritime engineering projects in Victoria in the late nineteenth century. It is evidence of Victoria's nineteenth century investment in regional port infrastructure and the development of Victorian coastal shipping. It is of significance for its association with the English civil engineer Sir John Coode, the most distinguished harbour engineer of the nineteenth century, who was brought to Victoria to advise on works to improve the Port of Melbourne, but was retained by the Government to advise on improvements to the harbours at Portland, Geelong, Port Fairy, and Lakes Entrance, as well as Warrnambool. His projects for Melbourne, Lakes Entrance and Warrnambool were major engineering projects of the nineteenth century. The breakwater is historically significant as a reminder of Warrnambool's early maritime history as a Western District port, and as one of Victoria's major 'outer ports'. While the Warrnambool Breakwater is a demonstration of the engineering skills of the nineteenth century, it also demonstrates the limitations of knowledge relating to sedimentology at the time and the confidence apparent in a number of nineteenth century plans which assumed that natural forces could be overcome or contained by engineering.
Year Construction Started 1884
Heritage Act Categories Heritage place
Municipality WARRNAMBOOL CITY

stingray bay foam flys 6199

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sat, 09 Jul 2011 21:51:07 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

the road is covered by flying foam from the rough seas in the often calm Stingray Bay

I love the beach in winter - you quite often get it to yourself and mother nature can put on a pretty spectacular show

sunset breakwater spray wave waterfall drenching lower deck 6209

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sun, 10 Jul 2011 19:40:32 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

sunset breakwater spray wave crashes over the edge 6208

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sun, 10 Jul 2011 19:39:36 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

I love the beach in winter - you quite often get it to yourself and mother nature can put on a pretty spectacular show

sunset breakwater spray 6207

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sun, 10 Jul 2011 19:38:36 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

low light but the waves towered over the breakwater.

breaking wave dwarfs the Warrnambool breakwater 6163

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sat, 09 Jul 2011 21:55:45 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

I love the beach in winter - you quite often get it to yourself and mother nature can put on a pretty spectacular show

Water is powerful, elemental. You have to love water to be out in these conditions but it makes you feel alive!

Strong winds and high tides in winter has caused the right conditions for the odd massive spray of water at the breakwater, where the Southern Ocean meets Lady Bay. Quite a school holiday attraction today with almost traffic jam conditions along viaduct road.

The breakwater is on the Victorian Heritage Register. The La Bella wreck is located just to the east.

Breakwater on a very calm day www.flickr.com/photos/gervo1865/5787903293/

Breakwater on a more normal day www.flickr.com/photos/gervo1865/4688863135/

From Victorian Heritage Database vhd.heritage.vic.gov.au/vhd/heritagevic_new#detail_places...
Victorian Heritage Register (VHR) Number
H2124
Level of Significance
Registered
Statement of Significance What is significant?
The Warrnambool Breakwater was designed by the eminent British harbour engineer Sir John Coode in 1879 and constructed between 1884 and 1890. Warrnambool was the centre of a prosperous farming region from the 1840s, and following the construction of jetties in the 1850s the harbour was extensively used and was a regular stop on the coastal steamer route. A plan was approved by the Government in 1874 to provide protection to shipping by constructing a breakwater, at an estimated cost of £110,000, but work stopped in 1877 after only £30,000 of this had been spent. In 1879 the Government commissioned Coode, who had been brought to Victoria by the Melbourne Harbour Trust to advise on works to improve the Port of Melbourne, to present a plan for completing the breakwater at Warrnambool. His original proposal was considered too expensive, and he presented a revised plan for a shorter structure to cost an estimated £134,000, consisting of a timber viaduct leading from the shore out to a 900 feet long concrete breakwater and wharf. In 1884 a tender was accepted for the approach works to the viaduct, to cost £27,173, and in 1885 a contract for £129, 017 was accepted from Arthur Dobson for the remaining works. The work was completed in 1890, but the structure soon proved to be too short to give good protection from weather from the south-east or to allow berthage for larger vessels. Rather than trade through the port increasing after the completion of the breakwater, it fell, largely because of competition from the just-completed railway line. It was also apparent that the breakwater was causing siltation in the harbour, which by 1910 required continuous dredging. In 1914 a contract was let for £70,000 to extend the breakwater by about 300 ft, but this work was a failure and the new structure soon began to subside. By the 1920s about two-thirds of the original harbour was silted up. An attempt was made in the 1920s to reduce siltation by sheeting the viaduct, but this only increased the problem. By the 1940s the harbour was no longer used. During the 1950s and 1960s the viaduct was altered again, with the base enclosed and filled with basalt and the road on top re-levelled.
The Warrnambool Breakwater consists of two parts: the concrete breakwater extending out into the bay, and the timber viaduct which once joined it to the shore, which now runs along the east side of the Merri River and is surrounded by land to the east. The breakwater is 30ft wide with a 15 ft wide parapet with a walkway along the top. It is made up of a base of 32 ton concrete blocks with mass concrete above the waterline. The viaduct was originally a raised timber structure, but is now filled in below and to the sides with bluestone rubble, and there is an asphalt roadway, known as Viaduct Road, laid along the top. The area to the east of the viaduct which was once part of the harbour is now land, and a car park has been constructed along the new shoreline. The breakwater railway was removed in 1962, though some remnants of rail remain, and all buildings once associated with the breakwater have also been removed.
How is it significant? The Warrnambool Breakwater is of historical significance to the state of Victoria.
Why is it significant? The Warrnambool Breakwater is of historical significance as one of the most important maritime engineering projects in Victoria in the late nineteenth century. It is evidence of Victoria's nineteenth century investment in regional port infrastructure and the development of Victorian coastal shipping. It is of significance for its association with the English civil engineer Sir John Coode, the most distinguished harbour engineer of the nineteenth century, who was brought to Victoria to advise on works to improve the Port of Melbourne, but was retained by the Government to advise on improvements to the harbours at Portland, Geelong, Port Fairy, and Lakes Entrance, as well as Warrnambool. His projects for Melbourne, Lakes Entrance and Warrnambool were major engineering projects of the nineteenth century. The breakwater is historically significant as a reminder of Warrnambool's early maritime history as a Western District port, and as one of Victoria's major 'outer ports'. While the Warrnambool Breakwater is a demonstration of the engineering skills of the nineteenth century, it also demonstrates the limitations of knowledge relating to sedimentology at the time and the confidence apparent in a number of nineteenth century plans which assumed that natural forces could be overcome or contained by engineering.
Year Construction Started 1884
Heritage Act Categories Heritage place
Municipality WARRNAMBOOL CITY

Warrnambool breakwater large swell breaks 6189

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sat, 09 Jul 2011 21:50:47 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

Warrnambool breakwater large swell breaks 6191

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sat, 09 Jul 2011 21:50:31 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

Warrnambool breakwater large swell breaks 6137

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sat, 09 Jul 2011 21:47:52 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

Strong winds and high tides in winter has caused the right conditions for the odd massive spray of water at the breakwater, where the Southern Ocean meets Lady Bay. Quite a school holiday attraction today with almost traffic jam conditions along viaduct road.

Breakwater on a very calm day www.flickr.com/photos/gervo1865/5787903293/

From Victorian Heritage Database vhd.heritage.vic.gov.au/vhd/heritagevic_new#detail_places...
Victorian Heritage Register (VHR) Number
H2124
Level of Significance
Registered
Statement of Significance What is significant?
The Warrnambool Breakwater was designed by the eminent British harbour engineer Sir John Coode in 1879 and constructed between 1884 and 1890. Warrnambool was the centre of a prosperous farming region from the 1840s, and following the construction of jetties in the 1850s the harbour was extensively used and was a regular stop on the coastal steamer route. A plan was approved by the Government in 1874 to provide protection to shipping by constructing a breakwater, at an estimated cost of £110,000, but work stopped in 1877 after only £30,000 of this had been spent. In 1879 the Government commissioned Coode, who had been brought to Victoria by the Melbourne Harbour Trust to advise on works to improve the Port of Melbourne, to present a plan for completing the breakwater at Warrnambool. His original proposal was considered too expensive, and he presented a revised plan for a shorter structure to cost an estimated £134,000, consisting of a timber viaduct leading from the shore out to a 900 feet long concrete breakwater and wharf. In 1884 a tender was accepted for the approach works to the viaduct, to cost £27,173, and in 1885 a contract for £129, 017 was accepted from Arthur Dobson for the remaining works. The work was completed in 1890, but the structure soon proved to be too short to give good protection from weather from the south-east or to allow berthage for larger vessels. Rather than trade through the port increasing after the completion of the breakwater, it fell, largely because of competition from the just-completed railway line. It was also apparent that the breakwater was causing siltation in the harbour, which by 1910 required continuous dredging. In 1914 a contract was let for £70,000 to extend the breakwater by about 300 ft, but this work was a failure and the new structure soon began to subside. By the 1920s about two-thirds of the original harbour was silted up. An attempt was made in the 1920s to reduce siltation by sheeting the viaduct, but this only increased the problem. By the 1940s the harbour was no longer used. During the 1950s and 1960s the viaduct was altered again, with the base enclosed and filled with basalt and the road on top re-levelled.
The Warrnambool Breakwater consists of two parts: the concrete breakwater extending out into the bay, and the timber viaduct which once joined it to the shore, which now runs along the east side of the Merri River and is surrounded by land to the east. The breakwater is 30ft wide with a 15 ft wide parapet with a walkway along the top. It is made up of a base of 32 ton concrete blocks with mass concrete above the waterline. The viaduct was originally a raised timber structure, but is now filled in below and to the sides with bluestone rubble, and there is an asphalt roadway, known as Viaduct Road, laid along the top. The area to the east of the viaduct which was once part of the harbour is now land, and a car park has been constructed along the new shoreline. The breakwater railway was removed in 1962, though some remnants of rail remain, and all buildings once associated with the breakwater have also been removed.
How is it significant? The Warrnambool Breakwater is of historical significance to the state of Victoria.
Why is it significant? The Warrnambool Breakwater is of historical significance as one of the most important maritime engineering projects in Victoria in the late nineteenth century. It is evidence of Victoria's nineteenth century investment in regional port infrastructure and the development of Victorian coastal shipping. It is of significance for its association with the English civil engineer Sir John Coode, the most distinguished harbour engineer of the nineteenth century, who was brought to Victoria to advise on works to improve the Port of Melbourne, but was retained by the Government to advise on improvements to the harbours at Portland, Geelong, Port Fairy, and Lakes Entrance, as well as Warrnambool. His projects for Melbourne, Lakes Entrance and Warrnambool were major engineering projects of the nineteenth century. The breakwater is historically significant as a reminder of Warrnambool's early maritime history as a Western District port, and as one of Victoria's major 'outer ports'. While the Warrnambool Breakwater is a demonstration of the engineering skills of the nineteenth century, it also demonstrates the limitations of knowledge relating to sedimentology at the time and the confidence apparent in a number of nineteenth century plans which assumed that natural forces could be overcome or contained by engineering.
Year Construction Started 1884
Heritage Act Categories Heritage place
Municipality WARRNAMBOOL CITY

Breakwater on a more normal day www.flickr.com/photos/gervo1865/4688863135/

Warrnambool breakwater large swell breaks 6150

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sat, 09 Jul 2011 21:48:45 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

Warrnambool breakwater large swell breaks 6161

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sat, 09 Jul 2011 21:49:53 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

Warrnambool breakwater large swell breaks 6160bw

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sat, 09 Jul 2011 21:47:41 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

Strong winds and high tides in winter has caused the right conditions for the odd massive spray of water at the breakwater, where the Southern Ocean meets Lady Bay. Quite a school holiday attraction today with almost traffic jam conditions along viaduct road.

Breakwater on a very calm day www.flickr.com/photos/gervo1865/5787903293/

From Victorian Heritage Database vhd.heritage.vic.gov.au/vhd/heritagevic_new#detail_places...
Victorian Heritage Register (VHR) Number
H2124
Level of Significance
Registered
Statement of Significance What is significant?
The Warrnambool Breakwater was designed by the eminent British harbour engineer Sir John Coode in 1879 and constructed between 1884 and 1890. Warrnambool was the centre of a prosperous farming region from the 1840s, and following the construction of jetties in the 1850s the harbour was extensively used and was a regular stop on the coastal steamer route. A plan was approved by the Government in 1874 to provide protection to shipping by constructing a breakwater, at an estimated cost of £110,000, but work stopped in 1877 after only £30,000 of this had been spent. In 1879 the Government commissioned Coode, who had been brought to Victoria by the Melbourne Harbour Trust to advise on works to improve the Port of Melbourne, to present a plan for completing the breakwater at Warrnambool. His original proposal was considered too expensive, and he presented a revised plan for a shorter structure to cost an estimated £134,000, consisting of a timber viaduct leading from the shore out to a 900 feet long concrete breakwater and wharf. In 1884 a tender was accepted for the approach works to the viaduct, to cost £27,173, and in 1885 a contract for £129, 017 was accepted from Arthur Dobson for the remaining works. The work was completed in 1890, but the structure soon proved to be too short to give good protection from weather from the south-east or to allow berthage for larger vessels. Rather than trade through the port increasing after the completion of the breakwater, it fell, largely because of competition from the just-completed railway line. It was also apparent that the breakwater was causing siltation in the harbour, which by 1910 required continuous dredging. In 1914 a contract was let for £70,000 to extend the breakwater by about 300 ft, but this work was a failure and the new structure soon began to subside. By the 1920s about two-thirds of the original harbour was silted up. An attempt was made in the 1920s to reduce siltation by sheeting the viaduct, but this only increased the problem. By the 1940s the harbour was no longer used. During the 1950s and 1960s the viaduct was altered again, with the base enclosed and filled with basalt and the road on top re-levelled.
The Warrnambool Breakwater consists of two parts: the concrete breakwater extending out into the bay, and the timber viaduct which once joined it to the shore, which now runs along the east side of the Merri River and is surrounded by land to the east. The breakwater is 30ft wide with a 15 ft wide parapet with a walkway along the top. It is made up of a base of 32 ton concrete blocks with mass concrete above the waterline. The viaduct was originally a raised timber structure, but is now filled in below and to the sides with bluestone rubble, and there is an asphalt roadway, known as Viaduct Road, laid along the top. The area to the east of the viaduct which was once part of the harbour is now land, and a car park has been constructed along the new shoreline. The breakwater railway was removed in 1962, though some remnants of rail remain, and all buildings once associated with the breakwater have also been removed.
How is it significant? The Warrnambool Breakwater is of historical significance to the state of Victoria.
Why is it significant? The Warrnambool Breakwater is of historical significance as one of the most important maritime engineering projects in Victoria in the late nineteenth century. It is evidence of Victoria's nineteenth century investment in regional port infrastructure and the development of Victorian coastal shipping. It is of significance for its association with the English civil engineer Sir John Coode, the most distinguished harbour engineer of the nineteenth century, who was brought to Victoria to advise on works to improve the Port of Melbourne, but was retained by the Government to advise on improvements to the harbours at Portland, Geelong, Port Fairy, and Lakes Entrance, as well as Warrnambool. His projects for Melbourne, Lakes Entrance and Warrnambool were major engineering projects of the nineteenth century. The breakwater is historically significant as a reminder of Warrnambool's early maritime history as a Western District port, and as one of Victoria's major 'outer ports'. While the Warrnambool Breakwater is a demonstration of the engineering skills of the nineteenth century, it also demonstrates the limitations of knowledge relating to sedimentology at the time and the confidence apparent in a number of nineteenth century plans which assumed that natural forces could be overcome or contained by engineering.
Year Construction Started 1884
Heritage Act Categories Heritage place
Municipality WARRNAMBOOL CITY

Breakwater on a more normal day www.flickr.com/photos/gervo1865/4688863135/

Warrnambool breakwater large swell breaks 5951

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sat, 09 Jul 2011 21:44:40 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

Warrnambool breakwater large swell breaks 6160

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sat, 09 Jul 2011 21:47:26 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

Strong winds and high tides in winter has caused the right conditions for the odd massive spray of water at the breakwater, where the Southern Ocean meets Lady Bay. Quite a school holiday attraction today with almost traffic jam conditions along viaduct road.

Breakwater on a very calm day www.flickr.com/photos/gervo1865/5787903293/

From Victorian Heritage Database vhd.heritage.vic.gov.au/vhd/heritagevic_new#detail_places...
Victorian Heritage Register (VHR) Number
H2124
Level of Significance
Registered
Statement of Significance What is significant?
The Warrnambool Breakwater was designed by the eminent British harbour engineer Sir John Coode in 1879 and constructed between 1884 and 1890. Warrnambool was the centre of a prosperous farming region from the 1840s, and following the construction of jetties in the 1850s the harbour was extensively used and was a regular stop on the coastal steamer route. A plan was approved by the Government in 1874 to provide protection to shipping by constructing a breakwater, at an estimated cost of £110,000, but work stopped in 1877 after only £30,000 of this had been spent. In 1879 the Government commissioned Coode, who had been brought to Victoria by the Melbourne Harbour Trust to advise on works to improve the Port of Melbourne, to present a plan for completing the breakwater at Warrnambool. His original proposal was considered too expensive, and he presented a revised plan for a shorter structure to cost an estimated £134,000, consisting of a timber viaduct leading from the shore out to a 900 feet long concrete breakwater and wharf. In 1884 a tender was accepted for the approach works to the viaduct, to cost £27,173, and in 1885 a contract for £129, 017 was accepted from Arthur Dobson for the remaining works. The work was completed in 1890, but the structure soon proved to be too short to give good protection from weather from the south-east or to allow berthage for larger vessels. Rather than trade through the port increasing after the completion of the breakwater, it fell, largely because of competition from the just-completed railway line. It was also apparent that the breakwater was causing siltation in the harbour, which by 1910 required continuous dredging. In 1914 a contract was let for £70,000 to extend the breakwater by about 300 ft, but this work was a failure and the new structure soon began to subside. By the 1920s about two-thirds of the original harbour was silted up. An attempt was made in the 1920s to reduce siltation by sheeting the viaduct, but this only increased the problem. By the 1940s the harbour was no longer used. During the 1950s and 1960s the viaduct was altered again, with the base enclosed and filled with basalt and the road on top re-levelled.
The Warrnambool Breakwater consists of two parts: the concrete breakwater extending out into the bay, and the timber viaduct which once joined it to the shore, which now runs along the east side of the Merri River and is surrounded by land to the east. The breakwater is 30ft wide with a 15 ft wide parapet with a walkway along the top. It is made up of a base of 32 ton concrete blocks with mass concrete above the waterline. The viaduct was originally a raised timber structure, but is now filled in below and to the sides with bluestone rubble, and there is an asphalt roadway, known as Viaduct Road, laid along the top. The area to the east of the viaduct which was once part of the harbour is now land, and a car park has been constructed along the new shoreline. The breakwater railway was removed in 1962, though some remnants of rail remain, and all buildings once associated with the breakwater have also been removed.
How is it significant? The Warrnambool Breakwater is of historical significance to the state of Victoria.
Why is it significant? The Warrnambool Breakwater is of historical significance as one of the most important maritime engineering projects in Victoria in the late nineteenth century. It is evidence of Victoria's nineteenth century investment in regional port infrastructure and the development of Victorian coastal shipping. It is of significance for its association with the English civil engineer Sir John Coode, the most distinguished harbour engineer of the nineteenth century, who was brought to Victoria to advise on works to improve the Port of Melbourne, but was retained by the Government to advise on improvements to the harbours at Portland, Geelong, Port Fairy, and Lakes Entrance, as well as Warrnambool. His projects for Melbourne, Lakes Entrance and Warrnambool were major engineering projects of the nineteenth century. The breakwater is historically significant as a reminder of Warrnambool's early maritime history as a Western District port, and as one of Victoria's major 'outer ports'. While the Warrnambool Breakwater is a demonstration of the engineering skills of the nineteenth century, it also demonstrates the limitations of knowledge relating to sedimentology at the time and the confidence apparent in a number of nineteenth century plans which assumed that natural forces could be overcome or contained by engineering.
Year Construction Started 1884
Heritage Act Categories Heritage place
Municipality WARRNAMBOOL CITY

Breakwater on a more normal day www.flickr.com/photos/gervo1865/4688863135/

Warrnambool breakwater large swell breaks 6018

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sat, 09 Jul 2011 21:44:53 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

Strong winds and high tides in winter has caused the right conditions for the odd massive spray of water at the breakwater, where the Southern Ocean meets Lady Bay. Quite a school holiday attraction today with almost traffic jam conditions along viaduct road.

Breakwater on a very calm day www.flickr.com/photos/gervo1865/5787903293/

From Victorian Heritage Database vhd.heritage.vic.gov.au/vhd/heritagevic_new#detail_places...
Victorian Heritage Register (VHR) Number
H2124
Level of Significance
Registered
Statement of Significance What is significant?
The Warrnambool Breakwater was designed by the eminent British harbour engineer Sir John Coode in 1879 and constructed between 1884 and 1890. Warrnambool was the centre of a prosperous farming region from the 1840s, and following the construction of jetties in the 1850s the harbour was extensively used and was a regular stop on the coastal steamer route. A plan was approved by the Government in 1874 to provide protection to shipping by constructing a breakwater, at an estimated cost of £110,000, but work stopped in 1877 after only £30,000 of this had been spent. In 1879 the Government commissioned Coode, who had been brought to Victoria by the Melbourne Harbour Trust to advise on works to improve the Port of Melbourne, to present a plan for completing the breakwater at Warrnambool. His original proposal was considered too expensive, and he presented a revised plan for a shorter structure to cost an estimated £134,000, consisting of a timber viaduct leading from the shore out to a 900 feet long concrete breakwater and wharf. In 1884 a tender was accepted for the approach works to the viaduct, to cost £27,173, and in 1885 a contract for £129, 017 was accepted from Arthur Dobson for the remaining works. The work was completed in 1890, but the structure soon proved to be too short to give good protection from weather from the south-east or to allow berthage for larger vessels. Rather than trade through the port increasing after the completion of the breakwater, it fell, largely because of competition from the just-completed railway line. It was also apparent that the breakwater was causing siltation in the harbour, which by 1910 required continuous dredging. In 1914 a contract was let for £70,000 to extend the breakwater by about 300 ft, but this work was a failure and the new structure soon began to subside. By the 1920s about two-thirds of the original harbour was silted up. An attempt was made in the 1920s to reduce siltation by sheeting the viaduct, but this only increased the problem. By the 1940s the harbour was no longer used. During the 1950s and 1960s the viaduct was altered again, with the base enclosed and filled with basalt and the road on top re-levelled.
The Warrnambool Breakwater consists of two parts: the concrete breakwater extending out into the bay, and the timber viaduct which once joined it to the shore, which now runs along the east side of the Merri River and is surrounded by land to the east. The breakwater is 30ft wide with a 15 ft wide parapet with a walkway along the top. It is made up of a base of 32 ton concrete blocks with mass concrete above the waterline. The viaduct was originally a raised timber structure, but is now filled in below and to the sides with bluestone rubble, and there is an asphalt roadway, known as Viaduct Road, laid along the top. The area to the east of the viaduct which was once part of the harbour is now land, and a car park has been constructed along the new shoreline. The breakwater railway was removed in 1962, though some remnants of rail remain, and all buildings once associated with the breakwater have also been removed.
How is it significant? The Warrnambool Breakwater is of historical significance to the state of Victoria.
Why is it significant? The Warrnambool Breakwater is of historical significance as one of the most important maritime engineering projects in Victoria in the late nineteenth century. It is evidence of Victoria's nineteenth century investment in regional port infrastructure and the development of Victorian coastal shipping. It is of significance for its association with the English civil engineer Sir John Coode, the most distinguished harbour engineer of the nineteenth century, who was brought to Victoria to advise on works to improve the Port of Melbourne, but was retained by the Government to advise on improvements to the harbours at Portland, Geelong, Port Fairy, and Lakes Entrance, as well as Warrnambool. His projects for Melbourne, Lakes Entrance and Warrnambool were major engineering projects of the nineteenth century. The breakwater is historically significant as a reminder of Warrnambool's early maritime history as a Western District port, and as one of Victoria's major 'outer ports'. While the Warrnambool Breakwater is a demonstration of the engineering skills of the nineteenth century, it also demonstrates the limitations of knowledge relating to sedimentology at the time and the confidence apparent in a number of nineteenth century plans which assumed that natural forces could be overcome or contained by engineering.
Year Construction Started 1884
Heritage Act Categories Heritage place
Municipality WARRNAMBOOL CITY

Breakwater on a more normal day www.flickr.com/photos/gervo1865/4688863135/

Warrnambool breakwater large swell breaks 5927

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sat, 09 Jul 2011 21:44:29 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

Strong winds and high tides in winter has caused the right conditions for the odd massive spray of water at the breakwater, where the Southern Ocean meets Lady Bay. Quite a school holiday attraction today with almost traffic jam conditions along viaduct road.

Breakwater on a very calm day www.flickr.com/photos/gervo1865/5787903293/

From Victorian Heritage Database vhd.heritage.vic.gov.au/vhd/heritagevic_new#detail_places...
Victorian Heritage Register (VHR) Number
H2124
Level of Significance
Registered
Statement of Significance What is significant?
The Warrnambool Breakwater was designed by the eminent British harbour engineer Sir John Coode in 1879 and constructed between 1884 and 1890. Warrnambool was the centre of a prosperous farming region from the 1840s, and following the construction of jetties in the 1850s the harbour was extensively used and was a regular stop on the coastal steamer route. A plan was approved by the Government in 1874 to provide protection to shipping by constructing a breakwater, at an estimated cost of £110,000, but work stopped in 1877 after only £30,000 of this had been spent. In 1879 the Government commissioned Coode, who had been brought to Victoria by the Melbourne Harbour Trust to advise on works to improve the Port of Melbourne, to present a plan for completing the breakwater at Warrnambool. His original proposal was considered too expensive, and he presented a revised plan for a shorter structure to cost an estimated £134,000, consisting of a timber viaduct leading from the shore out to a 900 feet long concrete breakwater and wharf. In 1884 a tender was accepted for the approach works to the viaduct, to cost £27,173, and in 1885 a contract for £129, 017 was accepted from Arthur Dobson for the remaining works. The work was completed in 1890, but the structure soon proved to be too short to give good protection from weather from the south-east or to allow berthage for larger vessels. Rather than trade through the port increasing after the completion of the breakwater, it fell, largely because of competition from the just-completed railway line. It was also apparent that the breakwater was causing siltation in the harbour, which by 1910 required continuous dredging. In 1914 a contract was let for £70,000 to extend the breakwater by about 300 ft, but this work was a failure and the new structure soon began to subside. By the 1920s about two-thirds of the original harbour was silted up. An attempt was made in the 1920s to reduce siltation by sheeting the viaduct, but this only increased the problem. By the 1940s the harbour was no longer used. During the 1950s and 1960s the viaduct was altered again, with the base enclosed and filled with basalt and the road on top re-levelled.
The Warrnambool Breakwater consists of two parts: the concrete breakwater extending out into the bay, and the timber viaduct which once joined it to the shore, which now runs along the east side of the Merri River and is surrounded by land to the east. The breakwater is 30ft wide with a 15 ft wide parapet with a walkway along the top. It is made up of a base of 32 ton concrete blocks with mass concrete above the waterline. The viaduct was originally a raised timber structure, but is now filled in below and to the sides with bluestone rubble, and there is an asphalt roadway, known as Viaduct Road, laid along the top. The area to the east of the viaduct which was once part of the harbour is now land, and a car park has been constructed along the new shoreline. The breakwater railway was removed in 1962, though some remnants of rail remain, and all buildings once associated with the breakwater have also been removed.
How is it significant? The Warrnambool Breakwater is of historical significance to the state of Victoria.
Why is it significant? The Warrnambool Breakwater is of historical significance as one of the most important maritime engineering projects in Victoria in the late nineteenth century. It is evidence of Victoria's nineteenth century investment in regional port infrastructure and the development of Victorian coastal shipping. It is of significance for its association with the English civil engineer Sir John Coode, the most distinguished harbour engineer of the nineteenth century, who was brought to Victoria to advise on works to improve the Port of Melbourne, but was retained by the Government to advise on improvements to the harbours at Portland, Geelong, Port Fairy, and Lakes Entrance, as well as Warrnambool. His projects for Melbourne, Lakes Entrance and Warrnambool were major engineering projects of the nineteenth century. The breakwater is historically significant as a reminder of Warrnambool's early maritime history as a Western District port, and as one of Victoria's major 'outer ports'. While the Warrnambool Breakwater is a demonstration of the engineering skills of the nineteenth century, it also demonstrates the limitations of knowledge relating to sedimentology at the time and the confidence apparent in a number of nineteenth century plans which assumed that natural forces could be overcome or contained by engineering.
Year Construction Started 1884
Heritage Act Categories Heritage place
Municipality WARRNAMBOOL CITY

Breakwater on a more normal day www.flickr.com/photos/gervo1865/4688863135/

Warrnambool breakwater large swell breaks 6142

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sat, 09 Jul 2011 21:48:24 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

Warrnambool breakwater large swell breaks 6158

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sat, 09 Jul 2011 21:49:39 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

Warrnambool breakwater large swell breaks 106

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sat, 09 Jul 2011 21:46:35 -0700

gervo1865_2 - LJ Gervasoni posted a photo:

Strong winds and high tides in winter has caused the right conditions for the odd massive spray of water at the breakwater, where the Southern Ocean meets Lady Bay. Quite a school holiday attraction today with almost traffic jam conditions along viaduct road.

Breakwater on a very calm day www.flickr.com/photos/gervo1865/5787903293/

From Victorian Heritage Database vhd.heritage.vic.gov.au/vhd/heritagevic_new#detail_places...
Victorian Heritage Register (VHR) Number
H2124
Level of Significance
Registered
Statement of Significance What is significant?
The Warrnambool Breakwater was designed by the eminent British harbour engineer Sir John Coode in 1879 and constructed between 1884 and 1890. Warrnambool was the centre of a prosperous farming region from the 1840s, and following the construction of jetties in the 1850s the harbour was extensively used and was a regular stop on the coastal steamer route. A plan was approved by the Government in 1874 to provide protection to shipping by constructing a breakwater, at an estimated cost of £110,000, but work stopped in 1877 after only £30,000 of this had been spent. In 1879 the Government commissioned Coode, who had been brought to Victoria by the Melbourne Harbour Trust to advise on works to improve the Port of Melbourne, to present a plan for completing the breakwater at Warrnambool. His original proposal was considered too expensive, and he presented a revised plan for a shorter structure to cost an estimated £134,000, consisting of a timber viaduct leading from the shore out to a 900 feet long concrete breakwater and wharf. In 1884 a tender was accepted for the approach works to the viaduct, to cost £27,173, and in 1885 a contract for £129, 017 was accepted from Arthur Dobson for the remaining works. The work was completed in 1890, but the structure soon proved to be too short to give good protection from weather from the south-east or to allow berthage for larger vessels. Rather than trade through the port increasing after the completion of the breakwater, it fell, largely because of competition from the just-completed railway line. It was also apparent that the breakwater was causing siltation in the harbour, which by 1910 required continuous dredging. In 1914 a contract was let for £70,000 to extend the breakwater by about 300 ft, but this work was a failure and the new structure soon began to subside. By the 1920s about two-thirds of the original harbour was silted up. An attempt was made in the 1920s to reduce siltation by sheeting the viaduct, but this only increased the problem. By the 1940s the harbour was no longer used. During the 1950s and 1960s the viaduct was altered again, with the base enclosed and filled with basalt and the road on top re-levelled.
The Warrnambool Breakwater consists of two parts: the concrete breakwater extending out into the bay, and the timber viaduct which once joined it to the shore, which now runs along the east side of the Merri River and is surrounded by land to the east. The breakwater is 30ft wide with a 15 ft wide parapet with a walkway along the top. It is made up of a base of 32 ton concrete blocks with mass concrete above the waterline. The viaduct was originally a raised timber structure, but is now filled in below and to the sides with bluestone rubble, and there is an asphalt roadway, known as Viaduct Road, laid along the top. The area to the east of the viaduct which was once part of the harbour is now land, and a car park has been constructed along the new shoreline. The breakwater railway was removed in 1962, though some remnants of rail remain, and all buildings once associated with the breakwater have also been removed.
How is it significant? The Warrnambool Breakwater is of historical significance to the state of Victoria.
Why is it significant? The Warrnambool Breakwater is of historical significance as one of the most important maritime engineering projects in Victoria in the late nineteenth century. It is evidence of Victoria's nineteenth century investment in regional port infrastructure and the development of Victorian coastal shipping. It is of significance for its association with the English civil engineer Sir John Coode, the most distinguished harbour engineer of the nineteenth century, who was brought to Victoria to advise on works to improve the Port of Melbourne, but was retained by the Government to advise on improvements to the harbours at Portland, Geelong, Port Fairy, and Lakes Entrance, as well as Warrnambool. His projects for Melbourne, Lakes Entrance and Warrnambool were major engineering projects of the nineteenth century. The breakwater is historically significant as a reminder of Warrnambool's early maritime history as a Western District port, and as one of Victoria's major 'outer ports'. While the Warrnambool Breakwater is a demonstration of the engineering skills of the nineteenth century, it also demonstrates the limitations of knowledge relating to sedimentology at the time and the confidence apparent in a number of nineteenth century plans which assumed that natural forces could be overcome or contained by engineering.
Year Construction Started 1884
Heritage Act Categories Heritage place
Municipality WARRNAMBOOL CITY

Breakwater on a more normal day www.flickr.com/photos/gervo1865/4688863135/

Warrnambool breakwater large swell breaks 6107

nobody@flickr.com (gervo1865_2 - LJ Gervasoni) — Sat, 09 Jul 2011 21:49:19 -0700

gervo1865_2 - LJ Gervasoni posted a photo: